The Snap Lock profile has an adjustable recessed pan with a raised seam that has a height of either 25mm or 38mm. Similar to Nail Strip in appearance, Snap Lock utilises a robust clip system that is perfect for both roofing and cladding applications.
“This profile is fast and simple to install, and it is excellent specifically for large residential or commercial projects.””
As the name suggests, the male and female rib snap together, locked into each other in order to create a strong sealed joint. This is ideal for buildings exposed to severe weather conditions such as strong winds, heavy rain, coastal spray and snowfall.
While still utilising a clip system, it does not require any other specialized tools for closing ribs, unlike some other profiles. This implies that Snap Lock is quick to install and it is excellent for large scale or time reduced applications.
This profile is fastened to a substrate using a concealed clip attached to the male rib. The adjacent female rib snaps tight over the male rib in order to create a strong watertight joint, suitable for both cladding and roofing applications. While some traditional profiles require special tooling, Snap Lock is quick and simple to install, which is great for time sensitive projects.
38mm Snap Lock is suitable for a minimum roof pitch of 3 degrees, and it is the most favoured among designers due to its clean flat pan as compared to other typical roll-formed roofing profiles with their unsightly strengthening ribs.
More so, unlike typical roll-formed products, Snap Lock’s adjustable pan width is excellent when it comes to designing and cladding those difficult areas.
Panels can be installed horizontally, vertically or diagonally to create a contemporary and dynamic aesthetic.
Panel width can be customised to suit your project, thus providing you with optimum flexibility when it comes to complex designs. This also allows control of the spacing between windows and doorways so that the panel lines finish neatly along with frames or shut lines.
Colorspan Industries are able to provide Architectural Cladding in a wide selection of material types and finishes to meet both aesthetic and performance properties.
This ensures your project maintains design consistency without compromising on durability or functionality.
Colorspan Industries use Australian made Blue Scope Steel products including Zincalume®, Galvabond®, Colorbond®. Choose from the full Colorbond® range including Metaliic, or request a custom material or finish to achieve your desired results.
Greencoat, NedZink, Aluminium, Stainless Steel, Copper and Weathering Steel materials are also available.
Material thickness availability:
Zincalume: 0.55mm
Galvabond: 0.55mm
Colorbond: 0.55mm
Cor-ten: 0.75mm
NedZink: 0.7m – 1.0mmm
Aluminium: 0.80mm
Copper: 0.70mm – 0.90mm
Stainless Steel: Size on Request
| Material | Thickness (mm) | Weight per m2 | Warranty | Flammability |
|---|---|---|---|---|
Colorbond® | 0.55mm | 7.31kg | Up to 15 years | Non-Combustible |
SSAB Color Coated Steel | 0.55mm | 7.31kg | Up to 50 years | Non-Combustible |
Stainless Steel | 0.6mm - 0.8mm | Varies | Up to 15 years | Non-combustible |
Aluminium | 0.80mm | 3.59kg | Up to 40 years | Non-Combustible |
NedZink | 0.70mm | 7.97kg | Up to 10 years | Non-Combustible |
Copper | 0.80mm | 11.36kg | Up to 30 years | Non-Combustible |
Weathering Steel | 0.75mm | 9.47kg | Up to 10 years | Non-Combustible |
Colorbond® steel is a 100% Australian product that has been tested and developed to withstand the harsh and extreme Australian Environment. Colorspan offers the complete Colorbond® range which includes the Contemporary; Classic; Stainless; Ultra; and Matt finishes, to achieve your design vision.
SSAB Color Coated Steel is the brand for innovative, sustainable color coated steel solutions for roofs, façades and rainwater systems. Widely used in sustainable architecture, SSAB Color Coated Steel products offer an extensive range of colors and coatings with Swedish rapeseed oil. To learn more click here.
Stainless Steel is one of the most common materials used in today’s construction. Wall cladding may be used both on the interior and exterior of buildings creating a striking architectural effect. There are a lot of reasons why Stainless Steel is the top choice for architects.
Aluminium is an economical & corrosion resistant product which is malleable, lightweight and strong so it can be easily shaped to suit a range of different profiles. Aluminium is non-combustible and comes with excellent material warranty.
NedZink is the leading Dutch zinc manufacturer of rolled titanium zinc for applications in façade cladding, roof covering, roof gutters and rainwater drainage systems. NedZink has been making the highest quality zinc products used in both large and small-scale projects worldwide, for over 125 years.
Copper has an attractive and unique finish; it is very durable and low maintenance with natural resistance to salt water corrosion making it ideal for coastal as well as traditional building applications. It is also 100% recyclable. Colorspan supplies copper from both Nordic Copper and TECU® (by KME).
Weathering Steel is a group of steel alloys which were developed to eliminate the need for painting, and form a stable rustlike appearance. We can provide weathering steel from both SSAB (COR-TEN® Steel) and Bluescope Steel (REDCOR® Steel).
Colorbond® steel is a 100% Australian product that has been tested and developed to withstand the harsh and extreme Australian Environment. Colorspan offers the complete Colorbond® range which includes the Contemporary; Classic; Stainless; Ultra; and Matt finishes, to achieve your design vision.
SSAB Color Coated Steel is the brand for innovative, sustainable color coated steel solutions for roofs, façades and rainwater systems. Widely used in sustainable architecture, SSAB Color Coated Steel products offer an extensive range of colors and coatings with Swedish rapeseed oil. To learn more click here.
Stainless Steel is one of the most common materials used in today’s construction. Wall cladding may be used both on the interior and exterior of buildings creating a striking architectural effect. There are a lot of reasons why Stainless Steel is the top choice for architects.
Aluminium is an economical & corrosion resistant product which is malleable, lightweight and strong so it can be easily shaped to suit a range of different profiles. Aluminium is non-combustible and comes with excellent material warranty.
NedZink is the leading Dutch zinc manufacturer of rolled titanium zinc for applications in façade cladding, roof covering, roof gutters and rainwater drainage systems. NedZink has been making the highest quality zinc products used in both large and small-scale projects worldwide, for over 125 years.
Copper has an attractive and unique finish; it is very durable and low maintenance with natural resistance to salt water corrosion making it ideal for coastal as well as traditional building applications. It is also 100% recyclable. Colorspan supplies copper from both Nordic Copper and TECU® (by KME).
Weathering Steel is a group of steel alloys which were developed to eliminate the need for painting, and form a stable rustlike appearance. We can provide weathering steel from both SSAB (COR-TEN® Steel) and Bluescope Steel (REDCOR® Steel).
265mm
0.55mm
38mm
850mm min. ~ 12000mm max.
Sheet length: ± 7mm
Covering width: ± 4mm
2.9mm increase on average for every 5m @50°C change in temp.
3 Degrees
Panel Coverage Distances is recommended to be at 265mm or below when installed onto battens.
However, it can be customised from a range of 180mm – 500mm if deemed necessary, with a flat substrate installed to ensure proper installation of the panel.
Watergate Plus by Thermakraft is a two-layer laminated pliable building membrane combining a Polyester non-woven layer with a high quality vapour permeable film.
The membrane allows water vapour to pass through from inside the wall cavity whilst water from the exterior is kept out.
After applying the Thermakraft Watergate Plus Membrane on the structural wall, STUDCO Tophat Battens are then installed horizontally.
A Foot Mould is then installed at the bottom section of the wall.
When the positioning of the starter flashing is secured, the very first Snap Lock panel will be attached over the starter strip.
When the positioning of the starter flashing is secured, the very first Snap Lock panel will be attached over the starter strip.
Repeat Step 5 until the entire wall is fully cladded.
A Capping is placed on top to secure the panels in place and to ensure no water leakage.
What is the difference between Snap Lock and the other rib profiles?
What is the difference between Snap Lock and the other rib profiles?
When it comes to appearance, The Snap Lock system is similar to Nail Strip but uses clips to fix underlap instead of screw fastening. Standing Seam also uses a comparable clip system but requires closing tools for its square-shaped rib. The Snap Lock pan width can still be adjusted like the other two profiles.
Are special tools required to install Standing Seam?
Are special tools required to install Standing Seam?
No, there is no need for any specialised tools. Fixing of clips to the substrate only is required.
How do I maintain my cladding (dependant on material)?
How do I maintain my cladding (dependant on material)?
Usually, clean water is sufficient with a soft, bristle brush. For more stubborn stains, a mild detergent can be used. Never use solvent based cleaners. Maintaining your cladding every 6 months is recommended more often in coastal and industrial areas.
Can I purchase flashings & accessories from Colorspan?
Can I purchase flashings & accessories from Colorspan?
Yes, you can; we custom make all flashings to a maximum length of 8.2 meters. We also keep a range of cladding and roofing accessories in stock.
What if I have a specific colour that is not part of the standard range?
What if I have a specific colour that is not part of the standard range?
We have the most popular colours in stock at all times. However, if you require a unique colour, Colorspan provides custom colour finish services. Please contact Colorspan Industries to discuss further.
Does Colorspan only supply or can they supply and install?
Does Colorspan only supply or can they supply and install?
Colorspan only manufactures cladding panels to order. However, we do have a wide range of certified installers we can recommend.
Where can I view the Colorspan cladding products and material range?
Where can I view the Colorspan cladding products and material range?
Our showroom is situated at 4 Aviation Place Tullamarine in Victoria. We are open from 9 am – 5 pm Monday to Friday.
Are Colorspan cladding materials fire resistant?
Are Colorspan cladding materials fire resistant?
All cladding materials supplied by Colorspan have been fire tested and they comply with the Australian Standard codes of practice.
If you have a passion for manufacturing, we are always looking for motivated people to join the Colorspan family. We commonly hire staff in the following areas:
Colorspan is looking for new people
https://www.stormtech.melbourne/
Colorspan have a range on new innovative materials that they have listed with Specifying Dynamics to talk to architects, designers and builders. https://www.specifyingdynamics.com.au
Danny Frawley’s legacy will live on at Moorabbin with St Kilda joining the Federal and Victorian Governments in announcing the construction of the Danny Frawley
Colorspan has debuted on Archify.com – the all-in-one digital platform for design and specification. Simplifying your specification process, Archify is a transparent platform designed to